As shown in the figure below, the names of the exterior parts of the car. 2: As shown in the figure below, the name of the internal structure of the car.
Vehicle exterior parts diagram Basically, the exterior parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
The car bumper is composed of three parts: outer plate, buffer material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact. As shown in the figure: The car leaf plate, also known as the wing plate, is located outside the body of the wheel, which can be said to be a covering part, which is conducive to the stability of the car.
Everyone must know that the steering wheel controls the direction of the car. The clutch pedal should be stepped on before hanging and removing the gear, which has the effect of making the car start smoothly and protecting the gears.Brake Brake is also called brake. Step on the brake pedal to achieve rapid braking of the car.
1. In radiator and engine gas The circulation channel in the cylinder is used to cool the liquid medium of the engine, mainly water and additives.Because of its antifreeze function, it is called antifreeze. Glass kettle: Everyone knows that it is used to clean glass. Now you should tell me where it is. Oil scale: oil volume detector.
2. The structure diagram of the automobile engine is as follows: the engine is composed of two major mechanisms: crank connecting rod mechanism and gas distribution mechanism, as well as five major systems such as cooling, lubrication, ignition, fuel supply and start-up system. The main components include cylinder block, cylinder head, piston, piston pin, connecting rod, crankshaft, flywheel, etc.
3. The fusele group is mainly composed of cylinder block, cylinder liner, cylinder head, cylinder pad and other parts. Cylinder block The cylinder block is made of gray cast iron. The cylindrical cavity in the upper part of the cylinder is called the cylinder. The lower half is the crankcase supporting the crankshaft, and its lumen is the space for the movement of the crankshaft.
4. Cylinder block.The cylinder block is the body of the cylinder. The crankcase is divided into upper and lower parts. The upper crankcase is used to support the crankshaft. The cylinder block and the upper crankcase of the water-cooled engine are cast into one, referred to as the cylinder block, as shown in Figure 3-8. It is the most complex part and the most massive part in the engine.
5. The engine of a car is composed of two major mechanisms and five major systems, namely the crank connecting rod mechanism, the gas distribution mechanism and the cooling system, the lubrication system, the fuel system, the start system and the ignition system. Each system is composed of relevant parts. The following is the parts recognition diagram of the engine.
Automobile engine: The engine is the power device of the automobile.It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
Engine lubrication system structure diagram Engine gas distribution mechanism connecting rod mechanism structure diagram engine body structure diagram engine cooling system structure diagram This is the structure diagram of the automobile engine. If you can't appreciate it yet, please take a look at the next most comprehensive internal structure diagram of the automobile system in history.
Auto parts name and engine structure diagram. Engine: The engine is the power unit of the car, which is composed of two major institutions and five major departments. Crank connecting rod mechanism: composed of fusele, piston connecting rod group, crankshaft flywheel group, etc.
1. The specific illustration is as follows: The car bumper is composed of three parts: outer plate, cushion material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact.
2. As shown in the figure below, the name of the exterior part of the car. 2: As shown in the figure below, the name of the internal structure of the car.
3. Basically, the appearance parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
4. Car engine: The engine is the power device of the car. It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
5. Car leaf plate The car leaf plate, also known as the wing plate, is located outside the body of the wheel and can be said to be a covering part. It can not only reduce the wind resistance coefficient when driving according to aerodynamics, but also greatly help the stability of the car.
OKX Wallet apk download latest version-APP, download it now, new users will receive a novice gift pack.
As shown in the figure below, the names of the exterior parts of the car. 2: As shown in the figure below, the name of the internal structure of the car.
Vehicle exterior parts diagram Basically, the exterior parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
The car bumper is composed of three parts: outer plate, buffer material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact. As shown in the figure: The car leaf plate, also known as the wing plate, is located outside the body of the wheel, which can be said to be a covering part, which is conducive to the stability of the car.
Everyone must know that the steering wheel controls the direction of the car. The clutch pedal should be stepped on before hanging and removing the gear, which has the effect of making the car start smoothly and protecting the gears.Brake Brake is also called brake. Step on the brake pedal to achieve rapid braking of the car.
1. In radiator and engine gas The circulation channel in the cylinder is used to cool the liquid medium of the engine, mainly water and additives.Because of its antifreeze function, it is called antifreeze. Glass kettle: Everyone knows that it is used to clean glass. Now you should tell me where it is. Oil scale: oil volume detector.
2. The structure diagram of the automobile engine is as follows: the engine is composed of two major mechanisms: crank connecting rod mechanism and gas distribution mechanism, as well as five major systems such as cooling, lubrication, ignition, fuel supply and start-up system. The main components include cylinder block, cylinder head, piston, piston pin, connecting rod, crankshaft, flywheel, etc.
3. The fusele group is mainly composed of cylinder block, cylinder liner, cylinder head, cylinder pad and other parts. Cylinder block The cylinder block is made of gray cast iron. The cylindrical cavity in the upper part of the cylinder is called the cylinder. The lower half is the crankcase supporting the crankshaft, and its lumen is the space for the movement of the crankshaft.
4. Cylinder block.The cylinder block is the body of the cylinder. The crankcase is divided into upper and lower parts. The upper crankcase is used to support the crankshaft. The cylinder block and the upper crankcase of the water-cooled engine are cast into one, referred to as the cylinder block, as shown in Figure 3-8. It is the most complex part and the most massive part in the engine.
5. The engine of a car is composed of two major mechanisms and five major systems, namely the crank connecting rod mechanism, the gas distribution mechanism and the cooling system, the lubrication system, the fuel system, the start system and the ignition system. Each system is composed of relevant parts. The following is the parts recognition diagram of the engine.
Automobile engine: The engine is the power device of the automobile.It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
Engine lubrication system structure diagram Engine gas distribution mechanism connecting rod mechanism structure diagram engine body structure diagram engine cooling system structure diagram This is the structure diagram of the automobile engine. If you can't appreciate it yet, please take a look at the next most comprehensive internal structure diagram of the automobile system in history.
Auto parts name and engine structure diagram. Engine: The engine is the power unit of the car, which is composed of two major institutions and five major departments. Crank connecting rod mechanism: composed of fusele, piston connecting rod group, crankshaft flywheel group, etc.
1. The specific illustration is as follows: The car bumper is composed of three parts: outer plate, cushion material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact.
2. As shown in the figure below, the name of the exterior part of the car. 2: As shown in the figure below, the name of the internal structure of the car.
3. Basically, the appearance parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
4. Car engine: The engine is the power device of the car. It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
5. Car leaf plate The car leaf plate, also known as the wing plate, is located outside the body of the wheel and can be said to be a covering part. It can not only reduce the wind resistance coefficient when driving according to aerodynamics, but also greatly help the stability of the car.
614.91MB
Check921.89MB
Check494.38MB
Check438.88MB
Check268.69MB
Check575.66MB
Check296.13MB
Check982.73MB
Check153.37MB
Check196.21MB
Check745.52MB
Check667.41MB
Check173.89MB
Check359.59MB
Check814.98MB
Check196.37MB
Check792.27MB
Check661.84MB
Check782.12MB
Check473.16MB
Check514.47MB
Check992.78MB
Check584.21MB
Check648.58MB
Check176.15MB
Check555.92MB
Check487.41MB
Check766.65MB
Check671.12MB
Check318.68MB
Check598.52MB
Check946.65MB
Check145.34MB
Check177.94MB
Check569.15MB
Check965.57MB
CheckScan to install
OKX Wallet apk download latest version to discover more
Netizen comments More
1798 推陈出新网
2025-01-23 10:57 recommend
1074 侈侈不休网
2025-01-23 09:24 recommend
1589 众志成城网
2025-01-23 09:21 recommend
1101 后来之秀网
2025-01-23 08:55 recommend
2815 生生死死网
2025-01-23 08:50 recommend